Pool'N Brush Sweep Hose Tail Scrubber Brush Replacement for Polaris & Pentair Pressure Cleaners
The Pool'N Brush is a pretty effective
after market Sweep Hose tail scrubbing brush that attaches to the
Sweep Hose of your Polaris or Pentair Pressure cleaner. The Pool”N
Brush is designed to scrub your pool surface as the Sweep Hose moves
along the pool bottom. Unlike the black foam Tail Scrubber that comes
with the cleaner, the Pool'N Brush his made out of hard plastic and
has hard bristle brushes on the bottom. It is designed to last 20
times longer than the OEM replacement foam tail scrubbers.
It has a cone shape and the brushes are
set in a way that it will so that it will make contact with the pool
surface and these brushes are designed to be very long lasting. The
weight of the Pool'N Brush insures that the tail will not come out of
the water and spray your pool deck and windows. Unlike the foam
scrubber it actually will scrub your pool surface allowing the Sweep
Hose not only to loosen debris but clean the pool surface.
The Pool'N Brush is easy to install. It
will snap right onto your existing Polaris or Pentair Legend Sweep
Hose where the foam scrubber sits. If the end is worn out a new
orifice tip and guard are also included with the Pool'N Brush. Remove
the old orifice tip with a pair of Channel Locks and slide the
included one into the Sweep Hose. Then simply snap the Pool'N Brush
onto the end and listen for it to clip in and you are all done. You
can also remove or move of the wear rings on the Sweep Hose to give
the tail some more sweeping motion. You can also increase the Sweep
Hose water pressure by loosening the Allen Screw on the cleaner body
right where the Sweep Hose attaches in the back. By turning the screw
counter clockwise you will increase water flow to the tail.
The Pool'N Brush fits these model
cleaners:
Polaris 180
Polaris 280
Polaris 360
Polaris 380
Polaris 3900 Sport
Polaris TR35P
Polaris TR36P
Pentair LX5000 Kreepy Krauly Legend II
Pentair LL505PMG Kreepy Krauly Platinum
The Pool'N Brush comes with a
manufacturer LIFETIME warranty covering any manufacturing defects so
rest assured you are investing in a product that will last a very
long time. If your OEM foam tail scrubber brush is worn out or even
missing, this would be a good time to invest in the Pool'N Brush.
Over time you will save money as you will no longer need to invest in
a new foam tail scrubber brushes every few months.
To Order the Pool'N Brush:
https://www.swimmingpoollearning.com/pool-n-brush-polaris-or-pentair-tai
To learn more about the Pool'N Brush
you can visit their website:
To order:
Comments
Post a Comment