Cyclonic Scrubbing Kit - Retrofit Kit for your Zodiac MX8
This is the Cyclonic Scrubbing Kit which is a retrofit kit to add two Cyclonic Scrubbing Turbine Assemblies with Brushes to your Zodiac MX8 cleaner. This is a great upgrade and will give your MX8 the same scrubbing action as the MX8 Elite.
These scrubbing brushes come standard on the NEW Zodiac MX8 Elite which is a great cleaner, you can see that cleaner reviewed in this video:
I am so glad Zodiac has come out with this Retrofit kit so as to not punish the owners of the original MX8. So no worries, you won't have to buy the MX8 Elite if you already own an MX8. You just won't have the cool see-thru plastic on the edges.
The design of the MX8 cleaner is so unique with the spinning turbines that it took only a very smart engineer to decide that adding brushes would be a great idea. These brushes are similar to those that you would find on a Robotic cleaner but the design of the MX8 allows for these brushes to spin and scrub off algae and dirt on the pool surface.
With an underwater camera you can actually hear the brushes rubbing the pool surface and see the dirt and algae lift right off. This will give your MX8 a new lease on life and take the cleaner to the next level.
The Cyclonic Scrubbing Kit is nothing fancy, just two new Turbines with the brushes attached. It takes about 2 minutes to do and all you need is a screwdriver. Very simple and easy. Any one with slight mechanical skills can do it. Watch the video below for detailed instructions.
So if you own an old MX8 cleaner pick up this kit today.
These scrubbing brushes come standard on the NEW Zodiac MX8 Elite which is a great cleaner, you can see that cleaner reviewed in this video:
I am so glad Zodiac has come out with this Retrofit kit so as to not punish the owners of the original MX8. So no worries, you won't have to buy the MX8 Elite if you already own an MX8. You just won't have the cool see-thru plastic on the edges.
The design of the MX8 cleaner is so unique with the spinning turbines that it took only a very smart engineer to decide that adding brushes would be a great idea. These brushes are similar to those that you would find on a Robotic cleaner but the design of the MX8 allows for these brushes to spin and scrub off algae and dirt on the pool surface.
With an underwater camera you can actually hear the brushes rubbing the pool surface and see the dirt and algae lift right off. This will give your MX8 a new lease on life and take the cleaner to the next level.
The Cyclonic Scrubbing Kit is nothing fancy, just two new Turbines with the brushes attached. It takes about 2 minutes to do and all you need is a screwdriver. Very simple and easy. Any one with slight mechanical skills can do it. Watch the video below for detailed instructions.
So if you own an old MX8 cleaner pick up this kit today.
If you own the MX6 you can still add the Cyclonic Scrubbing Kit to that video. The MX6 uses the same turbine and has a similar clearance on the bottom so the kit fits that cleaner well. To learn more you can watch this video:
Comments
Post a Comment