Even
though a Hot Tub is a small body of water it can be challenging to keep it
clear and safe if you don’t know the right way to check and balance it every week.
Fortunately balancing your Hot Tub is actually very easy and anyone can do it.
The first and main difference is the small body of water that you are dealing with.
A typical backyard pool has 15,000 gallons and a Hot Tub usually has 250-400
gallons of water in it. The chemistry adjustments, therefore, need to be done in
small doses, measured in teaspoons vs gallons or pounds. So a little really
goes a long way in a Hot Tub. For example, if a 300 gallon Hot Tub has a zero
chlorine reading you would just need 6 teaspoons of 12.5% liquid chlorine to
raise it to 3 ppm.
Since
they are often heated to 100 degrees all of the time be aware that the
chemicals in the spa will burn off much faster than they would in a
conventional inground pool. Since they are covered and out of the sun there is
also no need for Conditioner (cyanuric acid) to protect the chlorine from the
Sun’s UV Rays. Also, if you are using bromine Conditioner is not compatible
with it anyway so there is no need to add it to your Hot Tub.
You
need to have some idea of how much water is in your Hot Tub. The easy way to do
this is to find your manufacturer brand and model number and then go to their
website or call them and ask how many gallons are in that particular model.
Typically a Hot Tub will be 250 to 400 gallons so yours will be in that range.
You
also need a way to calculate the dosage to add to balance your Hot Tub water.
The easiest way to do this is to use a Chem Dosage App like https://www.poolcalculator.com/
These
apps will give you the exact amount of chemicals to add to achieve your desired
levels based on your Hot Tub size in gallons.
Here
are the Ideal Levels for your Hot Tub:
Free
Chlorine or Bromine ppm: Min 1.0 (Ideal 2.0-4.0) Max 5.0
pH:
Min 7.2 (Ideal 7.4-7.6) Max 7.8
Total
Alkalinity ppm: Min 80 (Ideal 80-120)
Max 120
Calcium
Hardness ppm: min 150 (Ideal 150-250) Max 250
Sanitizers:
Chlorine and Bromine are the primary sanitizers
that you will use in your Hot Tub. You would use either of these two
exclusively and not combine them in your Hot Tub. If you are using Bromine
Tablets you would therefore not use liquid chlorine. I prefer using chlorine
since it is easy to add and measure and it is highly effective. Bromine is also
a good choice and having tablets available is convenient in helping you
maintain your Hot Tub sanitizer level all week long. You just want to make sure
you don’t overdo it since it is a very small body of water and a little really
goes a long way.
UV System:
UV is a very popular add on in a spa. It
enhances the sanitation of the water and will allow you to use less chlorine
and bromine. UV light systems work by irradiating the water, as it passes by a
UV lamp the specific wavelength UV spectrum (254 nm) hits the water. When
exposed to UV light of this specific wavelength, living particles have their
DNA rearranged and become unable to reproduce, thus destroying algae, bacteria, and viruses. They are highly effective and are included with many new spas sold
on the market today.
Ozone:
Ozone Systems are another way to enhance your
Hot Tub sanitation. An Ozonator system duplicates the natural oxidation process
that exists in nature and produces ozone safely and in controlled amounts. When
with bromine or chlorine, ozone can reduce the amount needed to sanitize the
water and you can run your Hot Tub with as little as 1 ppm of each. An Ozone The system destroys microorganisms and breaks down harmful chemicals and cause
total dissolved solids to gather, thus increasing filtration of the water. The
water will stay cleaner and clearer with an Ozone System running in your Hot
Tub.
Low pH or low Alkalinity - Sodium Bicarbonate:
If the pH or Alkalinity falls below the ideal
levels you can easily raise both with sodium bicarbonate. The most familiar
product on the market and one you can readily use is Baking Soda. Sodium
bicarbonate is also sold under the label as Spa pH Up, Spa Alkalinity Up, pH
Increaser and any common name that indicates the product raises the pH and
Alkalinity. So look for a product with the active ingredient of sodium
bicarbonate or just purchase a bag of Baking Soda and use that to raise the pH
and Alkalinity in your Hot Tub.
High pH or high Alkalinity - Sodium Bisulfate:
If the pH or Alkalinity gets above the ideal
levels, you can easily lower it with dry acid or sodium bisulfate. It is sold
under the label of, Spa pH down, pH down, pH Decreaser, Dry Acid or anything
with the active ingredient of sodium bisulfate. Remember a little goes a long
way so do not overdo it or you will soon be adding sodium bicarbonate to bring
the level back up.
High or Low Calcium Hardness - Drain the Spa or add Calcium Chloride:
The calcium level in your Hot Tub will pretty
much match your fill water. So, if you have hard water in your area your spa
will likely have high calcium also. The only way to lower it is to drain the
spa. So you may need to drain your spa more often to keep the calcium hardness
in range. If your calcium hardness is low you can add a small amount of calcium
chloride to raise it up.
If the water starts to exhibit any of the
following it is time to drain it and refill it with fresh water. A green or
blue tint to the water indicates metal ions in the water. Drain and refill and
add a metal sequestering agent like Leisure Time Metal Gon. If the water gets
foamy this indicates that there are contaminants in the water or the Total
Dissolve Solid (TDS) levels are high. Drain and refill if excessive foam
persists. The water is cloudy and doesn’t clear up after adding a sanitizer and
running the spa. Drain spa and clean or replace the filters. At any point in
the water quality is compromised simply drain and refill.
YouTube Video Index: http://poolmandave.blogspot.com/2014/03/swimming-pool-tips-reviews-how-to-video.html – A
list of all of my videos.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.