Effective Ways to Lower Your Swimming Pool Alkalinty

Keeping your swimming pool's water chemistry balanced is essential for clear water and easy maintenance. One key factor is total alkalinity (TA), which, if too high, can lead to cloudy water and trouble maintaining the pH level. This quick guide shows how to lower alkalinity using muriatic acid and aeration.



What is Total Alkalinity (TA) and Why It Matters
TA measures the concentration of alkaline substances in the water, like bicarbonates and carbonates, which act as a buffer for pH levels. Ideally, your pool's TA should be between 80-120 ppm. When TA gets too high (above 120 ppm), it can cause cloudy water, scaling, and difficulty adjusting pH. Lowering TA will help bring everything back into balance.
Why Use Muriatic Acid?

Muriatic acid is commonly used to lower both alkalinity and pH in pools. The trick is that while it lowers both, it affects TA more, so the pH can be adjusted separately using aeration.

Step-by-Step: Lowering Alkalinity
1. Test Your Water: Before adding any chemicals, use a test kit to check the current alkalinity and pH levels.

2. Calculate the Acid Dosage: Based on your pool size and the test results, calculate the amount of muriatic acid needed. Generally, 1.5 quarts of muriatic acid in 10,000 gallons of water lowers alkalinity by 10 ppm.

3. Add Muriatic Acid:
• Turn off your pool pump.
• Dilute the acid by mixing it into a bucket of water (always add acid to water, not the other way around).
• Slowly pour the mixture into the pool, focusing on areas with good circulation.

4. Let the Water Circulate: Allow the water to circulate for about 30 minutes to an hour. Both pH and TA will drop, but TA should drop more significantly.

5. Aerate the Pool to Raise pH: Aeration raises pH without affecting alkalinity. You can aerate by:
• Running the return jets above water level.
• Turning on water features like fountains or waterfalls.
• Adding an air blower or using bubblers.

Aeration may take a few hours or a couple of days, depending on how much pH adjustment is needed. Test regularly to track progress.

6. Repeat if Necessary: If TA is still high but pH has dropped too low, repeat the process by adding more muriatic acid and continuing aeration. Keep testing until you reach your target levels.

Why This Method Works
• Cost-effective: Muriatic acid is affordable and easy to find at pool supply stores.
• Precise: You can fine-tune pH levels through aeration without affecting TA.
• Natural pH correction: Aeration raises pH naturally, without adding extra chemicals.

Safety Tips
• Wear gloves and goggles when handling muriatic acid to protect your skin and eyes.
• Always add acid to water, not water to acid, to prevent dangerous splashes.
• Work in a well-ventilated area if indoors, and never mix acid with other chemicals.

Final Thoughts
Lowering your pool’s alkalinity using muriatic acid and aeration is an efficient way to restore balanced water chemistry. Follow this process to keep your pool water crystal-clear and easy to maintain for a better swimming experience.




Comments

Post a Comment

Popular posts from this blog

Swimming Pool Tips, Reviews & How To Video Index (List) Alphabetical order

I have over 900 videos on my YouTube Channel: Swimming Pool Tips and How-To - so I have compiled an Index for you to help you find a video on a topic that you are having an issue with or want to learn more about. I hope this helps you find the information you will need to keep your pool looking sparkling every week. Website:  http://www.swimmingpoollearning.com/ Coaching Site:  https://poolguycoaching.com/ Podcast Site:  https://www.thepoolguypodcastshow.com/ eBook:  https://www.swimmingpoollearning.com/swimming-pool-care-ebook Listen to my weekly Podcast: Podcast on iTunes: https://itunes.apple.com/us/podcast/the-pool-guy-show-podcast/id1257613192 Google Play: https://play.google.com/music/listen#/ps/Imhdwnal25iyl4c2yfceih2ni4y Spotify:  https://open.spotify.com/show/4vBthPxqaNIAlw4LFVB2m3 A Above Ground Pool Care & Maintenance - The Ultimate Guide: https://youtu.be/j-hlTRSC0Fk ACID Magic User Friendly Muriatic Acid Alte...
Read more

Can I Use Clorox Bleach in my Pool?

Image
Regular Unscented Bleach I started doing pool service when I was 16 years old back in 1988. I took a break from the industry and did some Real Estate Investing and ran a small business for awhile. But I always loved working outdoors and so I decided to do pool service again. So I have about 15 years of practical experience in the field. My specialty has always been water chemistry as I was formally trained by an experts in the field. So I am well versed in most of the chemicals that are on the market today and I have used and tested a lot of different products. So when you hear those in the industry discourage and even slander anyone who uses bleach in their pool, you may think that it is not a product that you should use. In fact as you read this article you will find that using bleach and only bleach is a safe and smart choice. There is a lot of ignorance surrounding household bleach and the use of bleach in a swimming pool. Here is a video I made that goes in more detail on usin...
Read more

Mr. Pen Non-contact Voltage Meter - Don't Get Electrocuted!

Image
One of the biggest issues you will run into with anything connected to an AC power is if that device or equipment is receiving power. In the pool service industry, this often is the case when you find that a pool pump won’t turn on. Or if a pool timer doesn't on, is it receiving power? Also for repairs with so many breakers being unmarked, how do you know you turned off the right breaker. Bottom line, a non-contact detector like the Mr. Pen is an easy way to see if power is going to the equipment/device and the line is active. A non-contact voltage detector is just that. You don’t need to make contact with the line like with a Multimeter. Plus you don’t need to adjust any settings or knobs to get a voltage reading. Simply hold the Mr. Pen over a cord or wire whip and if there is AC power a red light will turn on and an audible beep will come out of the device. A very easy way to tell if power or a current is present.  To order: https://www.amazon.com/dp/B092LFYTG5?&_encoding=UT...
Read more