Cartridge Pool Filter Cleaning Step by Step Video Guide

Cleaning a cartridge filter is a pretty straightforward process. Each is a little different but the general principle is the same. Below are some links to the tools shown in the video.



Turn off the pool equipment: Before starting the cleaning process, turn off the pool pump to ensure safety and avoid any accidents. Make sure the pool is not going to turn on and if you are unsure just turn off the breaker to the pool pump. 

Release pressure: If your pool filter system has a pressure relief valve, use it to release the pressure inside the filter. You can also simply relieve the pressure by removing the drain plug on the bottom of the filter. I suggest this method as it will also drain the water from the tank.

Open the filter: Depending on your specific pool filter model, remove the locking mechanism or unscrew the top of the filter housing to access the cartridges inside. For the quad-type filters, there is a clamp held on by a Spring Barrel Nut.

Remove the cartridges: Carefully remove the cartridge elements from the filter housing. Take note of their orientation so that you can put them back in the same position later. Most cartridges will be marked with the word “Top” on the top. 

Rinse off loose debris: Use a garden hose with a high-pressure nozzle to rinse off loose debris and dirt from the cartridges. Direct the water from top to bottom and make sure you get the pleats completely clean.

Inspect the cartridges: Take a close look at the cartridges to ensure there are no tears, holes, or damage. If you find any significant damage, it's best to replace the cartridges.

Reassemble the filter: Once the cartridges are clean and dry, carefully place them back into the filter housing, making sure they are correctly oriented as they were before.

Close the filter: Securely fasten the filter housing, ensuring there are no leaks. Apply silicone lube to the o-ring to extend the life of the o-ring and to prevent leaks. 

Turn on the pool equipment and open the air relief valve: Once everything is reassembled and secured, turn on the pool pump and check for any leaks or abnormal pressure readings. You want to open the air bleeder/ air relief valve to remove any air from the tank.

I suggest cleaning single cartridge filters every 30 days and the quad-type 4 cartridge set up every 4-6 months. 

Blaster Silicone Spray:

Orbits Nozzle:

Multi-Tork Filter Socket Tools:

Cyclone Tool:


Comments

Post a Comment

Popular posts from this blog

Swimming Pool Tips, Reviews & How To Video Index (List) Alphabetical order

I have over 900 videos on my YouTube Channel: Swimming Pool Tips and How-To - so I have compiled an Index for you to help you find a video on a topic that you are having an issue with or want to learn more about. I hope this helps you find the information you will need to keep your pool looking sparkling every week. Website:  http://www.swimmingpoollearning.com/ Coaching Site:  https://poolguycoaching.com/ Podcast Site:  https://www.thepoolguypodcastshow.com/ eBook:  https://www.swimmingpoollearning.com/swimming-pool-care-ebook Listen to my weekly Podcast: Podcast on iTunes: https://itunes.apple.com/us/podcast/the-pool-guy-show-podcast/id1257613192 Google Play: https://play.google.com/music/listen#/ps/Imhdwnal25iyl4c2yfceih2ni4y Spotify:  https://open.spotify.com/show/4vBthPxqaNIAlw4LFVB2m3 A Above Ground Pool Care & Maintenance - The Ultimate Guide: https://youtu.be/j-hlTRSC0Fk ACID Magic User Friendly Muriatic Acid Alternative with 90% Less Fu
Read more

Can I Use Clorox Bleach in my Pool?

Image
Regular Unscented Bleach I started doing pool service when I was 16 years old back in 1988. I took a break from the industry and did some Real Estate Investing and ran a small business for awhile. But I always loved working outdoors and so I decided to do pool service again. So I have about 15 years of practical experience in the field. My specialty has always been water chemistry as I was formally trained by an experts in the field. So I am well versed in most of the chemicals that are on the market today and I have used and tested a lot of different products. So when you hear those in the industry discourage and even slander anyone who uses bleach in their pool, you may think that it is not a product that you should use. In fact as you read this article you will find that using bleach and only bleach is a safe and smart choice. There is a lot of ignorance surrounding household bleach and the use of bleach in a swimming pool. Here is a video I made that goes in more detail on usin
Read more

Mr. Pen Non-contact Voltage Meter - Don't Get Electrocuted!

Image
One of the biggest issues you will run into with anything connected to an AC power is if that device or equipment is receiving power. In the pool service industry, this often is the case when you find that a pool pump won’t turn on. Or if a pool timer doesn't on, is it receiving power? Also for repairs with so many breakers being unmarked, how do you know you turned off the right breaker. Bottom line, a non-contact detector like the Mr. Pen is an easy way to see if power is going to the equipment/device and the line is active. A non-contact voltage detector is just that. You don’t need to make contact with the line like with a Multimeter. Plus you don’t need to adjust any settings or knobs to get a voltage reading. Simply hold the Mr. Pen over a cord or wire whip and if there is AC power a red light will turn on and an audible beep will come out of the device. A very easy way to tell if power or a current is present.  To order: https://www.amazon.com/dp/B092LFYTG5?&_encoding=UT
Read more