Meet the MX8 Elite’s little Brother. The MX6 has been
on the market for quite some time now and Zodiac upgraded the MX8 cleaner a
couple of years ago to the MX8 Elite. It was time to do the same for the MX6
and now we finally have the MX6 Elite. The major upgrade to both the MX8 and
MX6 to make them Elite are the Scrubbing Brushes on the Cyclonic Scrubbing
Turbine Assembly.
Here is more about the MX6 Elite from Zodiac:
“The MX6 Elite brings superior scrubbing action and
best-in-class vacuum power to a compact suction cleaner. Combining Cyclonic
Scrubbing Brushes that spin and scrub fine and stuck-on debris with the impressive
wall-climbing ability and programmed navigation, the MX6 Elite provides
comprehensive cleaning of your pool floor, walls, and waterline. An innovative
low-flow design consumes less energy, making the MX6 Elite the ideal cleaner
for smaller pools with 2-speed or variable speed pumps.”
Features:
- Cyclonic
Suction - Powerful suction and
aggressive wall-climbing.
- Active
Scrubbing - Cyclonic Scrubbing Brushes
deep clean pool’s surfaces.
- Comprehensive
Coverage - X-Drive Navigation ensures complete
pool coverage from floor to waterline.
- Optimized
Flow Control - Flow Regulator Valve
automatically controls excess flow for optimal performance and longevity.
- Energy
Efficient - Articulating turbine blades provide the ultra-efficient operation, even on low-flow pumps.
The compact size of the MX6 Elite is one of the best
features of this cleaner. It is not designed for very large pools but for those
with small to medium size pools, this cleaner would be ideal. It not only
cleans and scrubs the floor of the pool but will climb the walls of your pool
and scrub up to the waterline.
If you are running a Variable Speed Pump, the MX6 Elite
is light enough to work on a lower RPM too. You can run the cleaner at 2600 RPM
in most cases and still be within the ideal range for the speed of the cleaner.
This will help maximize your energy savings and keep your pool clean each week.
Not many suction side cleaners can work off of lower RPM or lower speeds of a
Variable Speed Pump but the MX6 Elite is designed for it.
The scrubbing brushes are what sets the MX6 Elite apart
from other suction side cleaners. It is the only cleaner, besides the larger
MX8 Elite that is designed to scrub the pool surface to remove dirt, algae and
stubborn debris. The Cyclonic Turbines were designed to give the cleaner better
traction but since the turbines spin, adding brushes to them was just a
brilliant and obvious move. You can see the cleaner just lifting dirt and
debris right off the pool surface.
If you’re looking for an all-around great cleaner that
will clean both the pool floors and walls, the MX6 Elite would be a great
choice.
More on the MX6 and MX8 Cleaners: https://www.youtube.com/playlist?list=PLsvsTjbpoT-eOrvyX5As9js_F8FtVF3Xw
Visit my Website: http://www.swimmingpoollearning.com/
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.